Home > Windows 10 > Dvd Rom Goes To Pio Mode While Trying To Play DVD

Dvd Rom Goes To Pio Mode While Trying To Play DVD

Contents

I've tried uninstalling the DVD burner, the CD burner first then the DVD burner, both burners, and nothing works upon reboot. Instead, there are tabs offering General, Driver, Details, and Resources. if you do something wrong in regedit or bios you can seriously screw up your windows installation and in a bad case it can force you to completely reinstall windows. -Thanks It was certainly worth the effort, for both of us! http://webtrekkie.com/windows-10/dvd-transfer-mode-downgraded.php

The solution provided worked instantly, and completely. It is a script text file.) If the program found any ATA or SATA channel to reset, reboot your computer and test all drives. I would re-visit the bios settings, turn on the udma, you did save your settings upon exit? Thanks for visiting!

Dma Mode Windows 10

First see if you can change them in that window using the drop down menu. How do you figure out what is wrong with it? The failing drive was used exclusively to back up four other WD drives in the system none of which contain more than 100 GB of data. I also tried the utility, but got the German message others were getting.

  • Thanks very much (to the creator of this thread).
  • For this, I have donated $10 to your site.
  • If no success beyond the above, then you may want to dust out your rolodex and seek more adept puter friends or pro help.
  • Don't mention it!!!
  • Please try again now or at a later time.
  • Thank you!!! :) Thank you for the great page on DMA/PIO issues.

If not, uninstall the channel the drive is on and let the OS reinstall it. It seems so simple but believe me I tried everything for the last five months and had no joy until now, so here goes. 1, Click the start button from the just do not change anything else... Dvd Read Speed Slow Windows 7 Hardware and Sound, 4.

But I'm digressing. I see issues with drives on a daily basis in my day job as well as hundreds of questions coming in through my blog. After months of trouble-free operation, DVD playback suddenly started to crap out on me, and your site was the only one I could find that remedied this problem. IDE ATA and ATAPI Disks Use PIO Mode After Multiple Time-Out or CRC Errors Occur http://support.microsoft.com/kb/817472/ Do read this article because it contains a useful long-term workaround.

Login to post comments The stuttering DVD drive or the lame hard disk Mon, 2013-06-03 02:25 by OHDookie 6/2/2013 I have this problem for a long time and professional "techies" didn't As an added (and unexpected) bonus, I now understand the nature of the problem, why it happened, and why the solution provided fixed it. Is this problem linked with the DMA/PIO problems I'm having, or is something else I need to ask in a completely seperate post?? Erasing it or setting it to a DWORD value of 0xFFFFFFFF, rebooting, re-enabling DMA mode, and rebooting again seems to have solved the problem in some cases.

Enable Dma Windows 7

I now consider this issue resolved, with the lesson learned to test performance after installing a new HDD before putting it into service. Upon trying DVD Shrink, encoding is now taking 45 mins just for the main movie. Dma Mode Windows 10 Defragment your hard drive(s). Slow Dvd Drive Windows 10 This kind of cable is for harddrivews with ata66, 100, 133 specs.

Flag Permalink This was helpful (0) Collapse - Re:DVD-ROM Keeps Reverting to PIO Mode by R. http://webtrekkie.com/windows-10/dvd-player-won-t-play-cd-music-disks.php MasterDeviceTimingModeAllowed: This entry may be the problem child. An error (403 Forbidden) has occurred in response to this request. If the problem is still not solved, set the offending channel to PIO manually, reboot your computer, set the channel back to DMA, and reboot again. Windows 10 Dma

It is possible that Windows XP with Service Pack 2 re-enables DMA automatically on reboot, but I have not tested this yet. Somehow one of my numerous Google searches let me to your solution. and also, ...All CRC and timeout errors are logged in the system event log. this contact form Discussions cover Windows 2003 Server, Windows installation, adding and removing programs, driver problems, crashes, upgrading, and other OS-related questions.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion DVD-ROM Keeps Reverting to PIO Mode by

about the german error message: have you deleted the mentioned registry key?? Sure, you expect a 5 year old PC to be a little sluggish, but this was sudden and very noticeable. As long as I don't try to write a DVD the PC works fine.

Windows 7 did indeed reinstall it.

A not so rare hardware problem is a bad or too long IDE data cable. To reinstall my main computer would take me at least a week. http://forum.doom9.org/showthread.php?s=&threadid=43758 kr steVe Fastluck15th February 2005, 19:42Thx killingspree for the advice. Bill Fastluck25th February 2005, 15:42A week or so ago I did the following: I went into BIOs and turned the UDMA settings "OFF" and saved it then exited it.

If so, all is well. Stubbornly the drive kept using PIO mode, and Windows even changed these settings back to 0 (use PIO only). My system has been upgraded at least since Windows 3.0 (if not 2.1), but I admit that the wasted time to fix problems was still too high. navigate here as soon as you have a certain amount of read errors (and this amount is low, so it might be reached by just trying to rip one scratched DVD) XP automatically

It could be a burner or just a reader and it is just not working. The good news is that I LOVE learning about this, and the DMA-to-PIO downgrade explanation very much explains what I'm experiencing on a secondary/slave hard drive. If you use the program again after a short while, it may again report that it has reset the channels. A typical symptom of PIO mode is slow data transfer, accompanied by high processor load, leading, for example, to a choppy video display.

One of the things that causes your drive to burn slow all of a sudden is that you previously had put in a dirty or scratched disk & your drive light Re-enable DMA using the Registry Editor This chapter describes the manual way to do what the quick solution at the top of this page does automatically through a script program. Any help or suggestion would be greatly appreciated, before I start changing stuff and doing more harm :) EDIT: From some more looking around, I have a feeling that this problem By the way, the current service pack is 3, not 2.

One thing, though: I do not have any idea how to run vbs scripts, but I stumbled upon it after I downloaded your file resetdma.vbs.txt I found the file in WinExplorer I love the fact that I can go and search for an answer on the internet, and a good soul such as yourself will have taken the time to post such The operating system is everything but stable and not resistant to side effects from other software. This would be accurate for the existing two but, the replacement drive, after 30 or so seconds, would begin to fall back to 1 minute, 2 minutes etc., eventually leading to

Go to Device Manager: right-click on My Computer, select Properties, click on the Hardware tag, click on the Device Manager button, click on the plus sign to the left of IDE Sun, 2011-04-10 06:22 by DeltaSierra I've experienced this problem repeatedly over the years with my home-built system, never being able to find out what the cause was, before deciding to simply Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion Now your burner should be back to normal.

I reached the MoBo manufacturer... Bill stef2423rd February 2005, 15:06i got a smilar problem, also with a dell running xp. The ‘Current Transfer Mode' for Hard drives is usually DMA 4-6 and DVD burners DMA 2-4, DVD ROMs usually DMA. Login to post comments IT WORKED _ THANK YOU!

I thought to myself, the air seems fresher, the sun seems brighter.