DVD Drive Failing?
If you have two physical drives, make sure the operating system is actually looking at the drive the disc has been placed in. Don't keep running a drive that vibrates badly even if it plays discs. If not, proceed to Sound Failure. Samsung optical drives I have owned have failed and needed to be replaced after a short stint of being put into operation. Check This Out
Well, the rep figured the drive was bad since I couldn't even run the test with the blank media that I had been using (but was no longer able to), the If the drive fails to work in another PC or running in an external USB cage, the hardware is at fault. If there's a disc in the drive that can no longer be read, make sure the power supply lead is still seated in the socket on the back of the drive. If the factory disc works, the issue is with the media or drive compatibility, and it's unlikely any tweaks will cure that. click resources
Dvd Drive Diagnostic
Then of course try a new unit and see if it works properly. Proceed to ATA Drive Failure if the BIOS no longer registers the drive. If the BIOS doesn't register the drive, it may have dropped dead.
- Make sure your virus software is functioning and download and run the latest comprehensive malware checker with good ratings since some malware interferes with the optical drive.
- Some ancient systems have both a CD ROM (reader) and a CDR (recorder).
- If you still can't get the tray to eject and you need to recover the disc, the only option is to disassemble the drive.
Also, uninstall the DVD player in Device manager and let windows reinstall the SATA/IDE system driver on reboot. Return to Diagnostic Chart Does your system refuse to boot bootable factory DVDs or CDs, like operating systems from the last fifteen years? Be careful with any ribbon cables, since they aren't made for rough handling. Dvd Diagnostic Software This chapter is from the book This chapter is from the book Upgrading and Repairing PCs, 20th Edition Learn More Buy This chapter is from the book This chapter is
I miss my burner lol and it's only been a week. Cd/dvd Diagnostic The different generations of optical discs are read by different color lasers (different wavelengths of light) through different lenses. Return to Diagnostic Chart Did the drive test out as working when you tried it in an external USB shell or in another PC? http://www.tomshardware.com/forum/243420-44-symptoms-drive-failure The text below cannot be read sequentially.
Return to Diagnostic Chart Does your problem involve recording DVDs, CDs or Blu-ray discs? Test Dvd Drive Windows 10 Ive been using Maxell 8x dvd-rs and burning at 2x speed and so far although I havent had any burns fail this has made me wonder what the issue might have Scratches can render a disc unreadable, including deep scratches on the label surface which cause distortions in the layer that is actually being read from the bottom. Return to Diagnostic Chart Does the drive play CDs but not DVDs or DVDs but not CDs?
Return to Diagnostic Chart Shut down, restart, and try again. Homepage And more importantly what are big signs your burner is dying? Dvd Drive Diagnostic Instant download of the PDF eBook edition for $9.95 Computer Repair with Diagnostic Flowcharts Power Supply Video Card Motherboard/CPU/RAM Hard Drives CD and DVD Sound Card Modems and Networks Starting Your How To Check Dvd Drive Is Working In Windows 7 I tried cleaning the drive and even restored some registry settings I changed before the problem started, just in case, but the scratching noise still happens I thought Sony drives were
The media player you are using may display a specific error message, like telling you the screen properties must be set to a certain resolution and number of colors for a http://webtrekkie.com/dvd-drive/dvd-drive-recognizing-there-s-a-dvd-in-the-drive-but-won-t-play-through-my-computer.php Some older high speed drives take too long to spin up and report to the BIOS that there's a bootable disc present. If the drive is the Slave on primary IDE controller with the hard drive, move it to the secondary IDE controller as the Master (requires another IDE ribbon cable). When I run a test on the device my computer says the the device is working properly!! How To Test Dvd Drive Windows 7
The first step is to reinstall the driver. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook Reddit! 22 Sep 2005, 02:35 PM #6 Taelon Digital Video Specialist Join Date: Sep 2005 Location: Michigan The disc drive may not be able to read CD or DVD discs if it does not have enough power. this contact form Share Share this post on Digg Del.icio.us Technorati Twitter Facebook Reddit! __________________ 14 Sep 2005, 05:46 AM #3 kikojames Junior Member Join Date: Sep 2005 Posts: 3 Hello
See Recording Problems if you're having trouble reading a recorded disc. Check Dvd For Errors Share Share this post on Digg Del.icio.us Technorati Twitter Facebook Reddit! Manufacturers played some pretty clever tricks in making DVD drives backwards compatible with CDs using a single laser, but some designs include multiple lasers or mechanically swapped lenses.
Or, the player may report that it can't find a decoder (CODEC) to play the particular disc.
It is important to remember that the issues described below can also be caused by more than just a bad disc drive. Confirm this with multiple factory discs and try cleaning before replacing the drive. If so, the problem is either with your motherboard controller and drivers, or a hardware incompatibility. How To Check Cd Drive Is Working Or Not Return to Diagnostic Chart Can you listen to music CDs through your speakers?
Will the tray eject when you press the eject button? High speed drives will vibrate like crazy if a disc is off balance, usually because the disc itself has some weighting problem. It may turn out that the only way to render your DVD player compatible with a new type of copy protection is to update the DVD drive firmware. navigate here It is recommended that you replace the disc drive to fix the problem.
Glad to hear they are sending you a replacement. The Blu-ray standard has not caught on with PC manufacturers in a big way, and one of the results is that the software support is sketchy. Most drives have an activity LED that tells you when the drive is active. Return to Diagnostic Chart Does the drive read other discs?
In the following sections, you will learn how optical drives and media are similar, how they differ from each other, and how they can be used to enhance your storage and Try setting the boot sequence in CMOS Setup to boot to the optical drive first. Make sure the activity LED is lighting up on the drive you put the disc in when you try to read it. Return to Diagnostic Chart Computer Repair | Power Supply | Video Card | Motherboard/CPU/RAM | Hard Drives | CD and DVD | Sound Card | Modems | Networks | Foner Books
If you already have another device installed as the secondary Master, try the drive as the secondary Slave or temporarily replace the Master for the sake of seeing if it works. Sometimes you can get around this by opening and closing the tray, which should cause the drive to spin up, and hitting reset right after you've done so. If an update isn't available for your particular model, you can end up out of luck when it comes to playing discs from certain studios after a particular date. If your drive reads data, plays movies and music, boots bootable discs, and doesn't vibrate or make noise, it's likely a PC performance problem is degrading the playback.
If you're trying to eject a music CD or DVD using Media Player software (clicking on a software eject button on the screen) and it doesn't work, try the manual button A CD recorder along with a DVD player was a common two drive combination years ago, but the DVD may not be able to read CDs recorded just two inches away. Additional information How can I test for hardware failures in my computer? If you're running Microsoft Windows, run through Windows disc drive troubleshooting steps first.