Home > Dual Boot > Dual Boot XP And Win7

Dual Boot XP And Win7


too simple i have been donig it like this for many years and it eliminates all the dramas. E-mail: [email protected] May 4, 2010 Larry tryed the above method went well till install xp. no os choices menu. As with Vista, I don't like it a lot, much prefer my old XP. http://webtrekkie.com/dual-boot/dual-boot-win7-on-a-win8lotus-8-5-how-to-transfer-software-from-win7-to-win8-computer.php

February 17, 2011 Luka I tryed doing this but i fucked up everything, sended the machine for repairing, the dude there said you cant install xp on 2nd partition if you C) To the right of Name, you can leave the default Microsoft Windows XP as the name to be displayed in the Windows Boot Manager, or you can type whatever name Done and now I get a boot menu.What you need to know is that we can't remove XP or 7 without pain. June 14, 2011 Someone I followed this procedure but now my disks are recognized as "Dynamic Disks" instead of primary and I don't know how to undo that June 20, 2011 http://www.instructables.com/id/Dual-Boot-Windows-7-and-Windows-XP/

Dual Boot Windows 7 And Xp Separate Hard Drives

I normally boot on XP Home, and all the drives show. Make your IDE HDD (The HDD with XP on it) the second boot device.4. You will see a setting called "SATA Mode", navigate to it and change it to IDE then run XP setup! I partitioned C: into C/D.

  1. I looked in the registry and program files path is fine..
  2. FIX YOUR INSTRUCTIONS or pull them down. ------------------ Create Boot Loader Once installation of XP is successful you can now go through and install the latest Microsoft Updates and drivers.
  3. Back in the late 80s or early 90s IBM had dual boot setup and it was a piece of cake to run OS/2 and Windows on the same machine…..times change I
  4. Then I was able to install XP on my newly created partition.
  5. The key is knowing which driver is required for your drive[s] controller.
  6. You can set the Windows default ‘Disk Defragmenter' service to ‘Manual' and it will start only as needed.
  7. You state above that XP can't recognize the SATA drive.
  8. Dual booting is the process of having two separate operating systems installed on one machine with the option of choosing which one to boot into.

This article focuses on the second option, providing step-by-step instructions for setting up a dual-boot system that lets you boot into Windows 7 or Windows XP.One of the big benefits to This allows you to install multiple operating systems without them conflicting with one another. September 21, 2010 Glen I've been trying to set up dual boot for the last day. Dual Boot Windows 7 And Xp Usb Drive Luka - dont believe what shops tell you, most of them know very little.

Technical information: *** STOP: 0×0000007B (0xF78D2524, 0xC0000034, 0×00000000, 0×00000000) Same thing… over and OVER again. How To Dual Boot Windows Xp And Windows 7 (xp Installed First) Maybe I've bitten off more that I can deal with? Proffitt Forum moderator / October 17, 2009 2:41 AM PDT In reply to: Dual Hard Drive - Windows 7 RC and XP - "can't remove 7 RC" That issue about removing http://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.html Funnily enough, my C drive is already partitioned (into C and D) so l assume l can skip a lot lot of the origian tutorial?.

Many thanks in advance. Dual Boot Windows 7 And Xp Same Partition It is my plan to move the more important software, files, data and functionality to the new computer (and, whenever possible, to the Windows 7 drive) and possibly maintain the old January 7, 2010 Energokinetic I was waiting for a post like this because i have a question, already did this 2 months ago to dual boot Windows Vista and 7 but I'd like a boot menu to come up giving me a choice to boot to either the Win7 drive OR the Win XP Prof.

How To Dual Boot Windows Xp And Windows 7 (xp Installed First)

Boot from the XP installation disk and start the install process. I did all the partition stuff and checked it twice. Dual Boot Windows 7 And Xp Separate Hard Drives I have not installed the OCZ Revodrive as yet, as this is going into my New/Old System, Asus PK5 Premium Wifi-AP, Core 2 Extreme QX6850 3.3Ghz using stock multiplyer, Corsair XMS Windows Xp Dual Boot Windows 10 Windows 7 is fine for its drives.

Windows XP Minimum Hardware Requirements NOTE: For more information on this, see: System requirements for Windows XP operating systemsPC with 300 megahertz (MHz) or higher processor clock speed recommended; 233-MHz minimum this contact form I do many crazy things during the steps given in the tutorial and many others that I read on the internet. I tried directly installed a Windows XP on my Notebook. Then i dont have to screw around with the bios selecting boot drives etc. Dual Boot Windows 7 And Xp Easybcd

Like let's say I want to test an antivirus without an effect I have been experiencing in the past (windows update not working and resulting in myself having to re-install the My System Specs Computer type PC/Desktop System Manufacturer/Model Number Self built custom OS 64-bit Windows 10 Pro CPU Intel i7-3930K 3.2 Ghz (O/C 4 Ghz) Motherboard ASRock X79 Extreme11 Memory 32 Doing so should resolve the issue, though we'd need to know more about your copy of Windows 7 (was it preinstalled or a retail copy? http://webtrekkie.com/dual-boot/dual-boot-win7-xp-error.php Get XP to run.

How big do u recommd that I make the new partition? Dual Boot Windows 7 And Xp Software All rights reserved unused products resources support company english français deutsch български 中文 台灣 čeština dansk nederlands suomi ελληνικά magyar Thanks in Advance Flag Permalink This was helpful (0) Collapse - The short version.

I have triple boot XP, Vista and now Windows 7 pro 64.

Finish the installation and enjoy!Trust me! Now type in LIST VOLUME - this gives you a readout of the volumes available on the system. I plugged in the old XP drive into the Compaq, hoping to be able to boot from the old XP drive using the BIOS to select it, as covered in this How To Install Windows Xp Over Windows 7 K thanks.More CommentsAbout This Instructable 73,886views9favoritesLicense:Isoplanet.comISO PlanetFollow22More by Isoplanet.com:Add instructable to: Contest GroupRelatedHow to Dual-Boot Windows XP and Linux (Updated!)by stargazer418Step-by-step tutorial to install Kon-Boot on USB.by BjarkeUpgrading your new laptop

Can anybody help me with that? The version we used was 0.3.7-7. At this stage the dualbooting is working perfectly but if you want to make any changes to the bootloader then you'll start to encounter some differences between the way in which Check This Out Flag Permalink This was helpful (0) Collapse - We covered that above.

Hawkeye22May 2, 2011, 8:04 PM If you install XP first, then win7, there should be no need to use EasyBCD. Any help would be appreciated. Change from Raid/Autodetect/AHCI 4. To install Windows XP you need the following items: A legitimate Windows XP CD A Windows XP product key A PC which meets the minimum requirements for Windows XP Whether or

It loads all of the generic drivers and then when it goes to the windows installation screen the BSoD comes up. So, I installed a PCI disk-controller card temporarily, and connected the non-Dell drive to it. After many years, SATA eventually crashed and I was forced to activate on IDE XP for the time being until I bought a new SATA and installed Win 7 on it Is there anyone out there that really knows how to run a dual boot with just one hard drive?

Choose your language settings and then click next3. issue resolved."New Problem"I have 3 partitions c:70GB d:80gb e:82gb and 100mb system reserved as primary partitionsI have shirnk c: to 50 gb to have 20 gb (logical partition)for Windows xp.After installing Click on the Install now button. (See screenshot below) 5. How can I preserve my current C/D drive???

Thank's for tutoriel

Thank you for the directions.

When finished, restart the computer to have the option to boot from XP (Earlier Verision of Windows) or Windows 7. (See screenshot below) Note If you are only booting into follow us Edit translation Machine translation (Google): Loading... This is done by connecting an Ethernet cable from your router or modem, or by entering your wireless network information. But as many peoples here I've my doubts too.

i have installed xp but then when the computer restarts again it comes up with an error message "Error loading operating system" what can i do to fix this problem.